현재 가장 마지막 버전으로 사용하고 있는 5517 소스와 가장 처음 받았던 소스와의 차이점 내지는 바뀐 것들에 대한 문서이다. 가장 최근의 소스는 lib 파일을 만들었던, 5517ref 소스이고, 가장 처음의 소스는 3가지(여기석소스, 5517ref-1.0.0-DVB.zip, 5517ref-1.0.0B-DVB.zip) 이다. 나는 여기서 총 3번에 걸린 파일 비교를 통해 어떤 점이 바뀌었는지를 알아볼 것이다.

각각의 디렉토리 별로 비교를 했다.

여기석 보다 아래의 내용이 더 첨가 되었다.

set DVD_TRANSPORT=stpti
set DVD_PLATFORM=mb382
rem set DVD_PLATFORM=mb361
set DVD_SERVICE=DVB
set TARGET=c2hw_jei
rem set TARGET=5517
set DVD_TV_OUTPUT=RATIO_4TO3
set UNIFIED_MEMORY=1
set DVD_IO=UART

5517ref 와는 달리 UART 가 주석처리되 있다.

rem set DVD_IO=UART

PLL_FREQ	= 540
AUD_DSP_DIV	= 10
COMMS_DIV	= 10
EMI_FLASH_DIV	= 6      
...
if (freq==540)   value = 0x640a;
...
poke  0x20010008 0x0cff8000 ## ASB
...

PLL_FREQ	= 486
AUD_DSP_DIV	= 8
COMMS_DIV	= 8
EMI_FLASH_DIV	= 12      
...
setDivider (EMI)       (EMI_DIV)	  (WHOLE_VALUE) 
setDivider (HDDI)      (HDDI_DIV)	  (WHOLE_VALUE)
setDivider (EMI_MPX)   (EMI_MPX_DIV)   (WHOLE_VALUE)
...
poke  0x20010008 0x08800000
...

memory FLASH0        0x7Fe00000           (2*M)                ROM

memory FLASH0        0x7F800000           (8*M)                ROM

POD 와 FLASH 를 위한 bank 세팅이 수정되었다.

## bank 3
poke -d 0x202001c0     0x04000e99 ## 가장 처음 보드 원래 세팅값   version 3,4   마지막 
poke -d 0x202001c8   0x1800d500    ## IO Read LSI(read & write), SCM(read) 250ns fat81 250 ns
poke -d 0x202001d0   0x1774c400  ## IO Write 250ns fat81 250 ns
poke -d 0x202001d8   0x00000040  
## bank 4
poke -d 0x20200200   0x04000e99
poke -d 0x20200208   0x1800d500
poke -d 0x20200210   0x1774c400
poke -d 0x20200218   0x00000040
## bank 5
poke -d 0x20200240   0x02000e91
...
## other
##config_E_val = peek -q 0x20010028
##config_E_val |= 0x00020000            ## Set bit 17, leave others unchanged.
##poke -d 0x20010028   (config_E_val)   ## Gen Config E register.

바뀌기 전의 모습이다.

## bank3
poke -d 0x202001c0   0x00360791       ## EMIConfigData0. Peripheral format settings
poke -d 0x202001c8   0x10028722       ## EMIConfigData1. Peripheral read configuration
poke -d 0x202001d0   0x10028722       ## EMIConfigData2. Peripheral write configuration
poke -d 0x202001d8   0x0000000a       ## EMIConfigData3. Peripheral read/write configuration
## bank 4   -> bank 4 에 대한 세팅이 3개 뿐이다.
poke -d 0x20200200   0x00000e91      
poke -d 0x20200208   0x10004000
poke -d 0x20200210   0x10220000
## bank 5
poke -d 0x20200240   0x00000e91
...
config_E_val = peek -q 0x20010028
config_E_val |= 0x00020000            ## Set bit 17, leave others unchanged.
poke -d 0x20010028   (config_E_val)   ## Gen Config E register.

include "C:/STM/5517ref/config/board/dcu_mb382.cfg"
include "C:/STM/5517ref/config/board/mb382_emi.cfg"
include "C:/STM/5517ref/config/board/sti5516sd.cfg" ## unchanged from mb361
include "C:/STM/5517ref/config/board/clks_5516.cfg" ## unchanged from mb361
include "C:/STM/5517ref/config/platform/targets.cfg"
...
SMI_SIZE          = (13 * M)
...
memory SMI_TOP	 0xC1000000	      (16*M)		   RAM
memory FLASH0        0x7Fe00000           (2*M)                ROM

include "dcu_mb382.cfg"
include "mb382_emi.cfg"
include "sti5516sd.cfg" ## unchanged from mb361
include "clks_5516.cfg" ## unchanged from mb361
include "targets.cfg"
...
SMI_SIZE          = (5 * M)
...
memory SMI_TOP	 0xC0800000	      (8*M)		   RAM
memory FLASH0        0x7F800000           (8*M)                ROM

x = peek 0xC0000000 -d -q
x = peek 0xC0000000 -d -q
x = peek 0xC0000000 -d -q

write (x)
x =(peek 0xC0000000 -d -q)
write (x)
x =(peek 0xC0000000 -d -q)
write (x)
x =(peek 0xC0000000 -d -q)
write (x)

# Define to set EMI banks correctly for MB361
# Used in initfuncs.c
CFLAGS += -DM58LW032

추가된 것이 없음. 5517ref 는 위의 것을 더한 것임

# SCART_HARDWARE := 6410
# CFLAGS += -DSCART_HARDWARE=6410

SCART_HARDWARE := 6410
CFLAGS += -DSCART_HARDWARE=6410

#define STEM0_BASE_ADDRESS              0x50000000      /* EMI region 3, bank 1 */
#define STEM1_BASE_ADDRESS              0x60000000      /* EMI region 3, bank 2 */
#define STEM_BASE_ADDRESS               STEM0_BASE_ADDRESS     /* for backwards compatibility */
...
#define FLASH_BANK_0_BASE_ADDRESS       0x7Fa00000      /* EMI region 3, bank 5 */
...
#define MB382_SDRAM_BASE_ADDRESS        0xC0000000      /* EMI region 1 */
#define MB382_SDRAM_SIZE                0x1000000	/* 16 Mbytes, 128 Mbits */
#define MB382_SDRAM_FREQUENCY           108000
...
 
#ifdef ST_7020
 
/* Support db573/577 7020 STEM board, and describe its SDRAM (cf mb290.h) */
 
#define STI7020_BASE_ADDRESS            STEM1_BASE_ADDRESS
  /* STEM1; must be EMI bank 2 to use address expansion */
 
/* On db573, the 7020 host interface has 16-bit data, 25-bit address, so a total
  address space of 64 MB (0x4000000). The first half is reserved for registers,
  the rest maps the bottom half of the 7020 SDRAM */
 
#define DB573_SDRAM_BASE_ADDRESS        (STI7020_BASE_ADDRESS+0x02000000)
 
/* True size of A/V memory attached to 7020 and visible to it from 0x00000000 */
#define DB573_SDRAM_SIZE                0x2000000	/* 32 Mbytes, 256 Mbits */
 
/* frequency in kHz of A/V memory (100 MHz) */
#define DB573_SDRAM_FREQUENCY           100000
 
/* Also use db573 values for the generic macros */
#define SDRAM_BASE_ADDRESS              DB573_SDRAM_BASE_ADDRESS
#define SDRAM_SIZE                      DB573_SDRAM_SIZE
#define SDRAM_FREQUENCY                 DB573_SDRAM_FREQUENCY
 
/* Only part of the 7020 memory can be seen through the host interface */
#define SDRAM_WINDOW_BASE_ADDRESS       SDRAM_BASE_ADDRESS
#define SDRAM_WINDOW_SIZE               0x2000000	/* 32 Mbytes, 256 Mbits */
 
#else /* no db573, just mb382 - put its values in the generic macros */
 
#define SDRAM_BASE_ADDRESS              MB382_SDRAM_BASE_ADDRESS
#define SDRAM_SIZE                      MB382_SDRAM_SIZE
#define SDRAM_FREQUENCY                 MB382_SDRAM_FREQUENCY
 
#endif

#define STEM_BASE_ADDRESS               0x50000000      /* EMI region 3, bank 1 */
...
#define FLASH_BANK_0_BASE_ADDRESS       0x7F800000      /* EMI region 3, bank 5 */
...
#define SDRAM_BASE_ADDRESS              0xC0000000      /* EMI region 1 */
 
/* Size of A/V memory */
#define SDRAM_SIZE                      0x1000000	/* 16 Mbytes, 128 Mbits */
 
/* SDRAM frequency in KHz */
#define SDRAM_FREQUENCY                 108000

#define VERSION_STRING 					"PTI Driver - 26th June 2003 - Version 3.9.0 - TC version 3.9.0"
#define TC_VERSION  					0x00030900
#define PTI_VERSION 					0x00030900
...
boolean pti_halt( void );
boolean pti_restart( void );

#define VERSION_STRING 					"PTI Driver - 27th February 2003 - Version 3.8.4 - TC version 3.8.4"
#define TC_VERSION  					0x00030804
#define PTI_VERSION 					0x00030804

#define STBOOT_ERROR_STI2C              (STBOOT_ERROR_BASE + 8)
...
    STBOOT_DEVICE_5517 = 0x01F,
 
    /* values that don't come out of device_id;
      extra digit to avoid accidental value clashes */
    STBOOT_DEVICE_5520 = 0x1000,
    STBOOT_DEVICE_TT1
...
#if defined (ST_7020) && !defined(mb290) && !defined(mb295)
ST_ErrorCode_t  STBOOT_Init7020STEM( const ST_DeviceName_t I2CDeviceName,
                                     U32 SDRAMFrequency );
#endif /* db573 support */
...
#endif /* ifndef __STBOOT_H */

STBOOT_DEVICE_5520,
STBOOT_DEVICE_TT1,
STBOOT_DEVICE_5517 = 0x01F
...
#endif /* ifndef __STBOOT_H */

STDENC_MODE_SECAM,
STDENC_MODE_SECAM_AUX
...
STDENC_OPTION_BLACK_LEVEL_PEDESTAL_AUX,
STDENC_OPTION_CHROMA_DELAY,
STDENC_OPTION_CHROMA_DELAY_AUX,
STDENC_OPTION_LUMA_TRAP_FILTER,
STDENC_OPTION_LUMA_TRAP_FILTER_AUX,
...
BOOL BlackLevelPedestalAux;
BOOL YCbCr444Input;
...
BOOL              BlackLevelPedestalAux; /* only for macrocell version >= 12 */
S8                ChromaDelayAux;
BOOL              LumaTrapFilterAux;

STDENC_MODE_SECAM

STGXOBJ_BITMAP_TYPE_MB,
STGXOBJ_BITMAP_TYPE_MB_HDPIP
...

STGXOBJ_BITMAP_TYPE_MB

#include "stevt.h"
...
STLAYER_OMEGA1_STILL,
STLAYER_SDDISPO2_VIDEO1,
STLAYER_SDDISPO2_VIDEO2
...
ST_DeviceName_t             InterruptEventName;
STEVT_EventConstant_t       VideoDisplayInterrupt;
...
/* Video filter enum access (way to access to sepcific video filter)         */
typedef enum STLAYER_VideoFiltering_s
{
    /* Please keep enum order.    */
    STLAYER_VIDEO_CHROMA_AUTOFLESH,
    STLAYER_VIDEO_CHROMA_GREENBOOST,
    STLAYER_VIDEO_CHROMA_TINT,
    STLAYER_VIDEO_CHROMA_SAT,
 
    STLAYER_VIDEO_LUMA_EDGE_REPLACEMENT,
    STLAYER_VIDEO_LUMA_PEAKING,
    STLAYER_VIDEO_LUMA_DCI,
 
    /* Insert new filter names here ...... */
 
    STLAYER_MAX_VIDEO_FILTER_POSITION /* Last position of filter enum.       */
                                    /* Please insert new one above this line.*/
 
} STLAYER_VideoFiltering_t;
 
/* Video filter enum control (action to perform to specific video filter)    */
typedef enum STLAYER_VideoFilteringControl_s
{
    /* Please keep enum order.    */
 
    STLAYER_DISABLE,              /* Filter is disabled.                     */
                                  /* default values will be loaded !!!       */
    STLAYER_ENABLE_AUTO_MODE1,    /* Filter is enable with auto parameters 1 */
    STLAYER_ENABLE_AUTO_MODE2,    /* Filter is enable with auto parameters 2 */
    STLAYER_ENABLE_AUTO_MODE3,    /* Filter is enable with auto parameters 3 */
 
    STLAYER_ENABLE_MANUAL         /* Filter is enable with parameters        */
                                  /* set by API.                             */
 
} STLAYER_VideoFilteringControl_t;
 
/* Video filters individual manual parameters.      */
typedef struct STLAYER_AutoFleshParameters_s {
    U32 AutoFleshControl;   /* percent unit of maximum effect */
    enum {
        LARGE_WIDTH,
        MEDIUM_WIDTH,
        SMALL_WIDTH
    } QuadratureFleshWidthControl;
    enum {
        AXIS_116_6,         /* 116.60 */
        AXIS_121_0,         /* 121.00 */
        AXIS_125_5,         /* 125.50 */
        AXIS_130_2          /* 130.20 */
    } AutoFleshAxisControl;
} STLAYER_AutoFleshParameters_t;
 
typedef struct STLAYER_GreenBoostParameters_s {
    S32 GreenBoostControl;  /* percent unit of maximum effect */
                            /* Allowed : -100% to 100%        */
} STLAYER_GreenBoostParameters_t;
 
typedef struct STLAYER_TintRotationControl_s {
    S32 TintRotationControl;/* percent unit of maximum effect */
                            /* Allowed : -100% to 100%        */
} STLAYER_TintParameters_t;
 
typedef struct STLAYER_SatParameters_s {
    S32 SaturationGainControl;  /* 1100% of gain to apply to chroma     */
                                /* -100% = Max decrease of saturation.  */
                                /*    0% = No effect.                   */
                                /*  100% = Max Increase of saturation.  */
} STLAYER_SatParameters_t;
 
typedef struct STLAYER_EdgeReplacementParameters_s {
    U32 GainControl;        /* percent unit of maximum effect */
    enum {
        HIGH_FREQ_FILTER = 1,
        MEDIUM_FREQ_FILTER,
        LOW_FREQ_FILTER
    } FrequencyControl;
} STLAYER_EdgeReplacementParameters_t;
 
typedef struct STLAYER_PeakingParameters_s {
    S32 VerticalPeakingGainControl; /* percent unit of maximum effect        */
                                    /* Allowed : -100% to 100%               */
    U32 CoringForVerticalPeaking;   /* percent unit of maximum effect        */
    S32 HorizontalPeakingGainControl;   /* percent unit of maximum effect    */
                                        /* Allowed : -100% to 100%           */
    U32 CoringForHorizontalPeaking; /* percent unit of maximum effect        */
    U32 HorizontalPeakingFilterSelection;   /* Ratio (%) = 100 * Fs/Fc       */
                                            /* with Fs : Output sample freq. */
                                            /* with Fs : Centered filter freq*/
    BOOL SINECompensationEnable;    /* Sinx/x compensation enable/disable    */
} STLAYER_PeakingParameters_t;
 
typedef struct STLAYER_DCIParameters{
    U32 CoringLevelGainControl;     /* percent unit of maximum effect       */
    U32 FirstPixelAnalysisWindow;
    U32 LastPixelAnalysisWindow;
    U32 FirstLineAnalysisWindow;
    U32 LastLineAnalysisWindow;
} STLAYER_DCIParameters_t;
 
/* Video filters overall manual parameters.         */
typedef union STLAYER_VideoFilteringParameters_s
{
    STLAYER_AutoFleshParameters_t       AutoFleshParameters;
    STLAYER_GreenBoostParameters_t      GreenBoostParameters;
    STLAYER_TintParameters_t            TintParameters;
    STLAYER_SatParameters_t             SatParameters;
    STLAYER_EdgeReplacementParameters_t EdgeReplacementParameters;
    STLAYER_PeakingParameters_t         PeakingParameters;
    STLAYER_DCIParameters_t             DCIParameters;
 
} STLAYER_VideoFilteringParameters_t;
...
  STLAYER_VideoFiltering_t              VideoFiltering;
  STLAYER_VideoFilteringControl_t       VideoFilteringControl;
  STLAYER_VideoFilteringParameters_t    VideoFilteringParameters;
}}}
=== stlayer.h(여기석) ===
{{{
#ifdef HW_5508 /* st5508 workarounds */
    /* no workaround */
#endif
 
#ifdef HW_5510 /* st5510 workarounds */
    /* no workaround */
#endif
 
#ifdef HW_5512 /* st5512 workarounds */
    /* no workaround */
#endif
 
#ifdef HW_5514 /* st5514 workarounds */
    /* no workaround */
#endif
 
#ifdef HW_5516 /* st5516 workarounds */
    /* no workaround */
#endif
 
#ifdef HW_5517 /* st5517 workarounds */
    /* no workaround */
#endif
 
#ifdef HW_5518 /* st5518 workarounds */
    /* no workaround */
#endif
 
#ifdef HW_5578 /* st5578 workarounds */
    /* no workaround */
#endif
...
    STLAYER_OMEGA1_STILL
...
    U32 dummy; /* TBD */

#define STPTI_REVISION                 "STPTI_BASIC-REL_5.2.10"
...
STPTI_ERROR_WILDCARD_PID_NOT_SUPPORTED,
STPTI_ERROR_SLOT_ALREADY_LINKED
...
#define STPTI_NegativePid() 0xbeef
...
BOOL TC3_SignalEveryTransportPacket;

#define STPTI_REVISION                 "STPTI_DVB-REL_5.2.8";
...
STPTI_ERROR_WILDCARD_PID_NOT_SUPPORTED

/* parameter passed to STTUNER_GetLLARevision() for retrieving LLA versions of all the demods in the current build */
#define STTUNER_ALL_IN_CURRENT_BUILD 0xFF
...
STTUNER_TUNER_MAX2118,  /* satellite */
STTUNER_TUNER_DSF8910,  /* satellite */
...
STTUNER_OFFSET      = 1,
STTUNER_OFFSET_POSITIVE = 2,
STTUNER_OFFSET_NEGATIVE = 3
...
    typedef enum STTUNER_22KHzToneControl_e
    {
	    STTUNER_22KHz_TONE_DemodOP0Pin,
        STTUNER_22KHz_TONE_DemodDiseqcPin
    }
    STTUNER_22KHzToneControl_t;
 
 typedef enum STTUNER_PowerControl_e
    {
	    STTUNER_LNB_POWER_DemodDACPin,
        STTUNER_LNB_POWER_LNBPDefault
    }
    STTUNER_PowerControl_t;
...
 /*	Commnad for  DISEqC API IMPLEMENTATION (Satellite )*/
 
typedef enum STTUNER_DiSEqCCommand_e
    {
        STTUNER_DiSEqC_TONE_BURST_OFF,					/* Generic */
		STTUNER_DiSEqC_TONE_BURST_OFF_F22_HIGH,			/* f22 pin high after tone off */
		STTUNER_DiSEqC_TONE_BURST_OFF_F22_LOW,  		/* f22 pin low after tone off*/
		STTUNER_DiSEqC_CONTINUOUS_TONE_BURST_ON,  		/* unmodulated */
		STTUNER_DiSEqC_TONE_BURST_SEND_0_UNMODULATED,   /* send of 0 for 12.5 ms ;continuous tone*/
		STTUNER_DiSEqC_TONE_BURST_SEND_0_MODULATED,     /* 0-2/3 duty cycle tone*/
		STTUNER_DiSEqC_TONE_BURST_SEND_1, 				/* 1-1/3 duty cycle tone*/
		STTUNER_DiSEqC_COMMAND							/* DiSEqC (1.2/2)command   */
 
    }
    STTUNER_DiSEqCCommand_t;
...
        S32                    ResidualOffset;  /* (ter) */
...
        S32                     ResidualOffset;  /* (ter) */
...
/* Send and Receive strcutures for  DISEqC API */
 
 /*sat*/
 
typedef struct 
{
STTUNER_DiSEqCCommand_t	DiSEqCCommandType;			/* Command type */
unsigned char  uc_TotalNoOfBytes ;			/* No of Data bytes to be sent including framing and address bytes*/
unsigned char  *pFrmAddCmdData ;			/* Pointer to data to be sent; Data has to be sequentially placed*/  
unsigned char  uc_msecBeforeNextCommand;	/* Time gap required in milliseconds (ms) */
}
STTUNER_DiSEqCSendPacket_t;
 
 /*sat*/
typedef struct 
{
unsigned char  uc_TotalBytesReceived ;			/* No of Data bytes received including framing  byte*/
unsigned char  *ReceivedFrmAddData ;			/* Pointer to data received; Data has to be sequentially placed*/  
unsigned char  uc_ExpectedNoOfBytes;			/* Higher limit of expected bytes from peripheral*/
}
STTUNER_DiSEqCResponsePacket_t;
...
    ST_Revision_t  STTUNER_GetLLARevision(int);

        STTUNER_OFFSET      = 1

    STVID_DEVICE_TYPE_5517_MPEG,
    STVID_DEVICE_TYPE_GENERIC_DIGITAL_INPUT,
    STVID_DEVICE_TYPE_5528_MPEG,
    STVID_DEVICE_TYPE_5578_MPEG
...
    BOOL                                 HDPIPCapable;                   /* TRUE if supported */
...
typedef struct STVID_HDPIPParams_s{
    BOOL    Enable;
    U32     WidthThreshold;
    U32     HeightThreshold;
} STVID_HDPIPParams_t;
...
    void *                  BaseAddress2_p;
    void *                  BaseAddress3_p;
...
    U32 ApiPbLiveResetWaitForFirstPictureDetected; /* Counts number of LiveReset while waiting for a 1st picture parsed (automatic Stop()/Start() when idle for too long in real-time) */
    U32 ApiPbLiveResetWaitForFirstPictureDecoded;  /* Counts number of LiveReset while waiting for a 1st picture decoded (automatic Stop()/Start() when idle for too long in real-time) */
    U32 ApiPbLiveResetWaitForNextPicture;   /* Counts number of LiveReset while waiting for the next picture decoded (automatic Stop()/Start() when idle for too long in real-time) */
...
    U32 AvsyncPTSInconsistency;             /* Counts number of time the PTS of the current picture is not greater than the PTS of the previous picture */
    U32 DecodeStartConditionVbvDelay;       /* Counts number of times the 1st decode after STVID_Start occurs according to the Vbv_Delay information. */
    U32 DecodeStartConditionPtsTimeComparison; /* Counts number of times the 1st decode after STVID_Start occurs according to the comparison PTS - STC. */
    U32 DecodeStartConditionVbvBufferSize;  /* Counts number of times the 1st decode after STVID_Start occurs according to the Vbv_Buffer_Size information. */
...
    U32 DecodePbMaxNbInterruptSyntaxErrorPerPicture;    /* Counts number of SyntaxError interrupts */
...
    U32 DecodePbDecodeTimeOutError;         /* Counts number of decode time out */
    U32 DecodePbInterruptMisalignmentError; /* Counts number of decode misalignments */
...
    U32 DisplayPictureInsertedInQueueDecimated;      /* Counts number of pictures inserted in display queue */
    U32 DisplayPictureDisplayedByMain;            /* Counts number of pictures displayed (not decimated) */
    U32 DisplayPictureDisplayedByAux;            /* Counts number of pictures displayed (not decimated) */
    U32 DisplayPictureDisplayedDecimatedByMain;   /* Counts number of decimated pictures displayed */
    U32 DisplayPictureDisplayedDecimatedByAux;   /* Counts number of decimated pictures displayed */
    U32 DisplayPbQueueLockedByLackOfPicture;/* Counts number of time the display queue is locked by lack of picture to display */
    U32 DisplayPbPictureTooLateRejectedByMain;    /* Counts number of pictures rejected by display because too late */
    U32 DisplayPbPictureTooLateRejectedByAux;    /* Counts number of pictures rejected by display because too late */
...
#if defined(ST_5510) || defined(ST_5512) || defined(ST_5508) || defined(ST_5518) || defined(ST_5514) || defined(ST_5516) || defined(ST_5517) || defined(ST_5578)
...
ST_ErrorCode_t STVID_GetHDPIPParams(const STVID_Handle_t Handle, STVID_HDPIPParams_t * const HDPIPParams_p);
...
ST_ErrorCode_t STVID_SetHDPIPParams(const STVID_Handle_t Handle, const STVID_HDPIPParams_t * const HDPIPParams_p);
...
typedef struct STVID_PictureInfos_s
{
    STGXOBJ_Bitmap_t    BitmapParams;
    STVID_VideoParams_t VideoParams;
#if 0 /* needed only for De-Interlacer */
    STVID_PictureBufferHandle_t PictureBufferHandle;
#endif /* if 0 :needed for De-Interlacer */
} STVID_PictureInfos_t;
...
#if 0 /* needed for De-Interlacer */
 
typedef enum STVID_DisplaySynchronisationMode_e
{
    STVID_DISPLAY_SYNCHRO_AUTOMATIC_VTG_VSYNC_EVENT = 1,
    STVID_DISPLAY_SYNCHRO_MANUAL = 2
} STVID_DisplaySynchronisationMode_t;
 
ST_ErrorCode_t STVID_RequestPictureBuffer(const STVID_Handle_t Handle,
                        const STVID_PictureBufferHandle_t PictureBufferHandle);
 
ST_ErrorCode_t STVID_PresentPictureBuffer(const STVID_Handle_t Handle,
                          const ST_DeviceName_t LayerName,
                          const STVID_PictureBufferHandle_t PictureBufferHandle,
                          const STVID_Freeze_t * const Freeze_p);
 
ST_ErrorCode_t STVID_SynchronizeDisplay(const STVID_Handle_t Handle,
                                        const STVTG_VSYNC_t  ParitySimu,
                                        const ST_DeviceName_t LayerName);
 
ST_ErrorCode_t STVID_DisablePresentation(const STVID_Handle_t Handle,
                                         const ST_DeviceName_t LayerName);
 
ST_ErrorCode_t STVID_EnablePresentation(const STVID_Handle_t Handle,
                                        const ST_DeviceName_t LayerName);
 
ST_ErrorCode_t STVID_SetDisplaySynchronizationMode(const STVID_Handle_t Handle,
           const ST_DeviceName_t LayerName,
           const STVID_DisplaySynchronisationMode_t DisplaySynchronisationMode);
 
ST_ErrorCode_t STVID_SetDisplayPresentationDelay(const STVID_Handle_t Handle,
                                            const ST_DeviceName_t LayerName,
                                            const U32 DisplayPresentationDelay);
 
 
ST_ErrorCode_t STVID_DirectShowPicture(const STVID_Handle_t Handle,
                                        const ST_DeviceName_t LayerName,
                                        STGXOBJ_Bitmap_t * BitmapParams_p);
 
#endif /* if O needed for De-Interlacer */

    STVID_DEVICE_TYPE_GENERIC_DIGITAL_INPUT
...
    U32 ApiPbLiveReset;                     /* Counts number of LiveReset (automatic Stop()/Start() when idle for too long in real-time) */
...
    U32 DisplayPictureDisplayed;            /* Counts number of pictures displayed (not decimated) */
    U32 DisplayPictureDisplayedDecimated;   /* Counts number of decimated pictures displayed */
    U32 DisplayPbQueueLockedByLackOfPicture;/* Counts number of time the display queue is locked by lack of picture to display */
    U32 DisplayPbPictureTooLateRejected;    /* Counts number of pictures rejected by display because too late */
...
typedef struct STVID_PictureInfos_s
{
    STGXOBJ_Bitmap_t    BitmapParams;
    STVID_VideoParams_t VideoParams;
} STVID_PictureInfos_t;
...
#if defined(ST_5510) || defined(ST_5512) || defined(ST_5508) || defined(ST_5518) || defined(ST_5514) || defined(ST_5516)